I tried to implement this in a variety of ways, with the dynamic IP address
and the PPPoE being the major problems.
I ended up installing a Netscreen device in a separate DMZ of the FW1 to
handle the VPN connectivity. NS handles PPPoE and IKE in a very stable,
fast and easy to configure way. And cheap too ;-)
Patrick
>>>
[email protected] 23/10/01
16:19 >>>
Hi all,
I would like to try and use an ADSL
connection that uses PPPoE to create a
site to site VPN using IKE.
Central office uses FW-1 4. SP3 on NT4.0 SP6a
the remote site would use an
Intrusion.com PDS 2110 running FW-1 SOHO.
Would it be possible to use a PPPoE
compatible ADSL router such as the Cisco
827 router that can perform the
PPPoE on the firewall's behalf work? Has
anyone attempted to implement
something like this? Are there other ways of
dealing with PPPoE?...
maybe using a PPPoE client on the PDS 2110 (if there
is such a thing)
Unfortunately, the remote site only has ADSL with PPPoE
available...
otherwise I wouldn't even bother to mess with PPPoE.
Any info, advise, or
humor
appreciated.
Aaron
===============================================
To
unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html===============================================