| |
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [FW-1] ICCP and scada
- To: [email protected]
- Subject: Re: [FW-1] ICCP and scada
- From: Steven Schuster <[email protected]>
- Date: Mon, 26 Nov 2001 07:34:32 -0500
- Reply-to: Mailing list for discussion of Firewall-1 <[email protected]>
- Sender: Mailing list for discussion of Firewall-1 <[email protected]>
- Thread-index: AcFy+eZ6qg5OPEysQGawpqvgzo28mADfLMxg
- Thread-topic: [FW-1] ICCP and scada
ICCP (which is ISO over IP, TCP/102) works fine with NAT. We have been
doing it here for over a year and have not had any problems.
Steve Schuster
Midwest ISO
Security Analyst
-----Original Message-----
From: "Rodriguez Quintero, Juan Diego, SYNAPSIS Perú"
[mailto:[email protected]]
Sent: Wednesday, November 21, 2001 7:11 PM
To: [email protected]
Subject: [FW-1] ICCP and scada
We need to connect 2 scada networks using ICCP through a FireWall1 v4.1.
Our ICCP solution provider told us that it just use TCP/IP... but we are
not
sure if the ICCP protocol will support Address Translation. Does anyone
have
experience with a mixed solution of Scada devices with ICCP and FW1 and
"natting"?
Thanks in advance,
Juan Diego Rodríguez Quintero
> *syn*psis
> Filial Perú
Telf 517-1303, Fax 517-1232
> http://www.synapsis.cl
>
>
===============================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
===============================================
===============================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
===============================================
|
|
