[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] RE: [fw1-wizards] RE: [FW1] dnsinfo
If I have multiple IP Network, i goto to show it like this in dnsinfo.C ? :topology ( : ( :ipaddr (X.Y.0.0) :ipmask (255.255.0.0) ) : ( :ipaddr (10.Z.0.0) :ipmask (255.255.0.0) ) : ( :ipaddr (10.W.0.0) :ipmask (255.255.0.0) ) ) I see nothing on this in documentation Thanks -----Message d'origine----- De : Gregor Munro [mailto:[email protected]] Envoyé : 29 janvier, 2001 14:27 À : Idan Dolev; Firewall_Mailing_List (E-mail); Firewall (E-mail) Objet : [fw1-wizards] RE: [FW1] dnsinfo Idan, be VERY careful with the placement of spaces etc. Also, what is the client that you are using? Win 9x or later? There is a different LMData portion required for win9x clients (that is undocumented). If any part of the file is wrong, then you will not be able to get it working. Please review the attached except from my earlier post which I've included again so that others out there still asking the same question can find an answer. PS to everyone out there... there are a number of searchable and browseable archives of this mailing list. It's a good place to start *before* posting the same questions again and again. A couple of these are: Daniel Kim's - http://msgs.securepoint.com/cgi-bin/get/fw1.html (browseable) - http://search.securepoint.com/ TSG's - http://www.shmoo.com/mail/fw1/ Enjoy ! Cheers Greg ---[snip]--- The use of :domain label in the dnsinfo.C file is only for the Windows NT clients. To quote the Public Configuration Document "To solve the issue of browsing with a Win98 client, we previously had to manually add an LMHOSTS entry to the clients: 10.10.1.10 "PDC-KIRK \0x1b" #PRE This entry is only required to allow Win98 clients to browse in Network Neighborhood; however, they can still authenticate and browse by Universal Naming Convention (UNC) when it is not used. WinNT clients do not require this entry. This entry in the LMHOSTS file is required for Win98 clients to locate the domain master browser for retrieval of a resource list - THIS IS ALWAYS THE PDC. The name must be padded out to 15 characters with spaces and contained in double-quotes as shown above. Appended to the padded name is a hex character \0x1b that notifies our client this name is a domain master browser. Be sure to add the #PRE tag to store this in the NetBIOS name cache or this will not work. " But if you have SP2 and configure it as per my earlier email. You dont have to manually configure each win 98/95 workstation as it will be done whenever the topology is updated. So the Anatomy of the dnsinfo.C file for LMHOSTS is as follows: >( ^Required at the top of the file. > :LMdata ( ^Section Label (note the lowercase 'd' and the whitespace after the label). > : ( ^Required LMHOSTS entry (note the whitespace after the colon) > :ipaddr (10.0.0.1) ^IP address of the PDC (note the whitespace) > :name (MERLIN) ^Name of the PDC > :domain (ROUNDTABLE) (note the whitespace) ^Name of the Domain that this is the PDC for (note the whitespace) > ) ^Required end of the definition for this LMHOSTS entry > : ( ^Required for Win95/98 clients ( note the whitespace after the colon) > :ipaddr (10.0.0.1) ^IP Address of the PDC (note the whitespace) > :name (MERLIN) ^Name of the PDC (note the whitespace) > ) ^Required end of the definition for this LMHOSTS entry for Win95/98 clients > ) ^Required - ends the LMdata section >) ^Required at bottom of file. ---[End of snip]--- -----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of Idan Dolev Sent: Tuesday, 30 January 2001 5:26 a.m. To: Firewall_Mailing_List (E-mail); Firewall (E-mail) Subject: [FW1] dnsinfo Guys, I am able to see my LMhost file updated but my hosts file stays the same, is it suppose to get updated from my dns server,what excatly is suppose to be writen there ? ( :dns_servers ( : (spock.firewall :obj ( : (10.10.1.100) ) :topology ( : ( :ipaddr (10.10.1.0) :ipmask (255.255.255.0) ) ) :domain ( : ( :dns_label_count (3) :domain (.xpert.com) ) ) ) ) :encrypt_dns (true) :LMdata ( : ( :ipaddr (192.168.0.200) :name (PDC-KIRK) :domain (AD) ) : ( :ipaddr (10.10.1.20) :name (BDC-SPOCK) :domain (DOM-NCC1701) ) ) ) ~ ============================================================================ ==== To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ============================================================================ ==== --------------------------------------------------------------------- This email came from the FireWall-1 Wizards Mailing List To unsubscribe, e-mail: [email protected] For more information, email: [email protected] ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|