1. Upgrade the FireWall-1 module to VPN-1/ FireWall-1 4.1
SP5
2. Disable the "routing and Remote Access" (To access this
service please go to: start -> programs -> Administrative Tools ->
Routing and Remote Access -> right click the server and press
disable).
3. Reboot the machine
4. Open the registry from command line by running the command
"regedit"
5. Go to ->
HKEY_LOCAL_MACHINE\SYSTEM\CurrentContralSet\Services\Tcpip\Parameters
6. Change the value to "1" in the Dword key
"IPEnableRouter"
7. Restart the machine
8. Now you can run the 'fwparp.exe' utility as follow: 'fwparp
static_ip external_fw-1_ip'
9. Add route on the FireWall-1 routing table as follow: 'route
add -p static_ip invalid_ip'
10. Start the FireWall-1 machine (fwstart)
11. Install the policy (after verifying that you've configure
the static NAT on the host)
(Note that you have to run the 'fwparp.exe' after every reboot
and that it will work from VPN-1/FireWall-1 4.1 SP5 and later)
-----Mensaje original-----
De: Mailing
list for discussion of Firewall-1
[mailto:[email protected]]En
nombre de
Andrade Guerra, Marcelo
Enviado el: martes, 23 de abril de 2002 15:00
Para: [email protected]
Asunto: [FW-1] arp problem with NG FP1
Hi Gurus, I have NG FP1 with Windows 2000, but ARP proxy
dont´t work, I
configure automatic arp, but don´t
work, i Configure local.arp, But Don´t
work. I need
Help Please
Thanks Gurus
=================================================
To set vacation, Out Of Office, or away messages,
send an email to [email protected]
in the BODY of the email add:
set
fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please
see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
[email protected]
=================================================