Re: [FW-1] Nokia IP110 & IPSO update

[Juan Concepcion <juanconcepcion@FW1-NOSPAMEARTHLINK.NET>]

Hopefully you upgraded the boot manager before you did the ipso, otherwise you
corrupted your installation.  The only remedy, and someone correct me if I'm
wrong, would be to delete the initial file for that install under Voyager,
delete the 3.4.1 package and then re-do the install the correct way, upgrading
the boot manager first, and then the ipso, in this manner you get the correct
initial file created.



Thomas Nilsen wrote:

> Since there seem to be no explicit malinglist for the Nokia IP hardware I'll
> try to post this here...
>
> We've just tried to upgrade a Nokia IP110 with the IPSO 3.4.1 release (from
> 3.3.3). After the upgrade, the box no longer boots properly. During boot, it
> will fail to load he boot manager (just stops after "Loading
> bootmanager.....")
>
> As I kept the old IPSO image it is possible to boot the box using the old
> kernel image. However, as Checkpoint 4.1 SP5 requires the new IPSO image, we
> are quite lost as to what we need to do (Nokia want to charge us $1000 to
> solve the issue)
>
> During the IPSO install, a new boot manager was installed. (No document on
> Nokia suggests that a new boot manager was required for this release on the
> IP110 platform).
>
> Anyone had the same problem?
>
> Booting on the new IPSO image, will produce an output like this:
>
> [kernel] symtab c040c000, sym_start c040c004, sym_end c0442e5c
> [kernel] sym_size 4932, str_size 4d6ec
> [ preserving 0x84548 bytes of kernel symbol table ]
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>         The Regents of the University of California.  All rights reserved.
>
> Resizing packet buffers: mbufs 15360 clusters 7680
> releng 826  08.18.2001-053000
> CPU: 267-MHz Pentium (586-class CPU)
> real memory  = 67108864 (64M bytes)
> avail memory = 57192448 (54M bytes)
> mediagx0 <Cyrix GXLV CPU with PCI/Memory Controller> rev 0 on pci0:0:0
> mediagx1 <Cyrix CS5530 PCI to ISA bridge> rev 0 on pci0:18:0
> mediagx2 <Cyrix CS5530 SMI> rev 0 on pci0:18:1
> mediagx3 <Cyrix CS5530 IDE> rev 0 on pci0:18:2
> Probing for devices on the ISA bus:
> sio0 at 0x3f8-0x3ff irq 4 on isa
> <5>sio0: type 16550A
> sio1 at 0x2f8-0x2ff irq 3 on isa
> <5>sio1: type 16550A
> wdc0 at 0x1f0-0x1f7 irq 14 on isa
> wdc0: unit 0 (wd0): <IBM-DJSA-205>, LBA
> wd0: 5000MB (9767520 sectors), LBA geometry: 608 cyls, 255 heads, 63 S/T
> wd0: Physical geometry: 10336 cyls, 15 heads, 63 S/T
> npx0 on motherboard
> npx0: INT 16 interface
> superio0 at 0x0 on isa
> SEEPROM revision: actual=1, latest=2
> mediagx4 <Cyrix CS5530 audio> rev 0 on pci0:18:3
> fxp0 <Intel EtherExpress Pro 10/100B Ethernet> rev 9 int a irq 6 slot 1
> netlog:eth-s1p1 .. Ethernet address 0:a0:8e:20:8:a7
> fxp1 <Intel EtherExpress Pro 10/100B Ethernet> rev 9 int a irq 10 slot 2
> netlog:eth-s2p1 .. Ethernet address 0:a0:8e:20:8:a8
> fxp2 <Intel EtherExpress Pro 10/100B Ethernet> rev 9 int a irq 11 slot 3
> netlog:eth-s3p1 .. Ethernet address 0:a0:8e:20:8:a9
>
> Best Regards,
> Thomas Nilsen
> Kverneland IT AS
> Phone: +47 5142 9463 - Mobile: +47 991 55 001
>
> ===============================================
> To unsubscribe from this mailing list,
> please see the instructions at
> http://www.checkpoint.com/services/mailing.html
> ===============================================

===============================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
===============================================