[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] RE: [FW1] Management Clients hang up... What's up ???
Is your FWM deamon running on the managment station?? If this dies then you cannot open up any GUI stuff at all. Russell Goodwin -----Original Message----- From: LO GUIDICE, Yannick [mailto:[email protected]] Sent: 20 October 2000 16:01 To: 'Goodwin, Russell'; Fw-1-Mailinglist (E-mail) Subject: RE: [FW1] Management Clients hang up... What's up ??? I switched the logs using the 'fw log switch' command. It worked fine. I can't even remember seeing my logs so cleared. Unfortunately, it did not change anything to the problem. I checked also the name resolution, which works fine. However, I have not been able to uncheck the 'resolve addresses' option in the log viewer because I can't launch the program to access the options... When things go wrong... So, I don't know what to do. The session agent works fine. What the hell is waiting the log viewer ? I have to say that the system status and the policy editor do not work either. Help... -- Societe V. MANE FILS Yannick Lo Guidice Poste 1366 Technicien reseau [email protected] +33 493 097 000 -- -----Original Message----- From: Goodwin, Russell [mailto:[email protected]] Sent: vendredi 20 octobre 2000 10:56 To: 'LO GUIDICE, Yannick'; Fw-1-Mailinglist (E-mail) Subject: RE: [FW1] Management Clients hang up... What's up ??? Yannick, If this is just your log viewer I would suspect that it would be either the size of your logs or the logviewer is trying to resolve the names. Turn this of by deselecting 'Select--->Options--->Resolve Names'. How long do you have to wait? Do you have any problems with other GUI's? Do you switch your logs, and how big do they get? Hope this is a help Russell Goodwin -----Original Message----- From: LO GUIDICE, Yannick [mailto:[email protected]] Sent: 18 October 2000 08:36 To: Fw-1-Mailinglist (E-mail) Subject: [FW1] Management Clients hang up... What's up ??? -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all, I've got a problem with my management clients (ite : Log Viewer, System Status, Policy editor). I'm running FW1 4.1 SP2 build 41716 on WinNT. I've installed the Management Clients 4.1 SP2 and the Session Agent 4.1 on my WNT 4.0 Workstation SP6A. That's ok. When I launch Log Viewer, I enter the username1, password1, firewall address. The authentication agent pops up and I enter user2 and password2, which works fine. But after that, the log viewer is stalled and seems waiting for something... But what ? On the firewall logs I can see successful authentications : the session agent works fine. So the problem is with the log viewer... I'm stuck with this problem. Can anyone help ? - -- Societe V. MANE FILS Yannick Lo Guidice Poste 1366 Technicien reseau [email protected] +33 493 097 000 - -- -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 6.5.3 for non-commercial use <http://www.pgp.com> iQA/AwUBOe1EuIWcJRbg6/R8EQKIXACg1f6iZKFMh3VwWFT57kiq8/QdJ5sAoLCF wN9d/60mim0GvdsgLhi79sV1 =V6W4 -----END PGP SIGNATURE----- ************************************************************************** CONFIDENTIALITY: This e-mail and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you are not the intended recipient or the person responsible for delivering the e-mail to the intended recipient, you are advised that you have received this e-mail in error and that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please notify: [email protected] ************************************************************************** ============================================================================ ==== To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ============================================================================ ==== ************************************************************************** CONFIDENTIALITY: This e-mail and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you are not the intended recipient or the person responsible for delivering the e-mail to the intended recipient, you are advised that you have received this e-mail in error and that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error please notify: [email protected] ************************************************************************** ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|