[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [FW1] Management Console using non-routable IP.
This situation has cause me a lot of trouble. Here's how everything is currently configured; Management console - Running on NT 4.0, using a 1918 non routable IP. - 192.168.1.1. The 650 is handling NAT for this device, giving it the virtual IP of 73.1.1.1 Nokia 650 - multiple interfaces, one is on the same 1918 network as the management workstation - 192.168.1.1, another is an internet IP - 73.1.1.2 Nokia 330 - situated in a different office, has a 1918 ip on a different network than the above two, 192.168.2.1, and an internet interface 62.1.1.1 My problem is that I can't seem to get the management console to control both firewalls at the same time. I've tried various putkeys and can control either firewall by doing this, but not both at once. Specifically, here's what I've tried; On management console putkey -n 192.168.1.1 -p password 73.1.1.2 192.168.1.2 putkey -n 73.1.1.1 -p password 62.1.1.1 on 650 putkey -n 192.168.1.2 -p password 192.168.1.1 on 330 putkey -n 62.1.1.1 -p password 73.1.1.1 Does anyone have any ideas/suggestions? Thanks in advance. Jeff Jarmoc - CCNA, MCSE Network Analyst - Grubb & Ellismailto:[email protected] ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|