| |
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[FW1] bloomberg services
We are trying to setup a couple users to use bloomberg finanical news. The
dedicated software requires a series of 100 udp ports and 50 tcp ports open.
For instance, the udp ports are 48100 to 48200 and tcp ports are 4920 to
4970.
Talked to Check Point (gold) technical support. Two "specialists" offered
two different answers. One said that we should use the source port range in
the workstation object. The other said we need to use port range instead of
workstation object. Confused and the solution is not working. Any
suggestions are appreciated.
>From the firewall log, we could see the firewall has accepted the packets,
but no response from bloomberg servers. However, when we telnet using a
defined port, e.g., 4921. The bloomberg servers responsed!
There is only one rule saying "any" "bloomberg servers" "tcp-port range and
udp-port range" "accept".
Your comments/suggestions are badly needed.
Regards,
Ivan
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
|
|
