[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [FW-1] NG FP3 New HA Cluster Question
What type of hardware is this running on? If you truly are running clustering on a nokia and not VRRP HA, then you will not be able to ping the Virtual addresses. This is, IMHO, a major problem with running clustering in the current generation of the ipso based clustering. Ted Serreyn > > I have a NG FP3 HA cluster (not load-sharing) internal to the LAN not doing > NAT, just packet-filtering. Should I be able to ping both cluster IP's? > etc. see below: > > 1st side > Cluster IP - 10.0.0.1 > Firewall 1 - 10.0.0.2 > Firewall 2 - 10.0.0.3 > > 2nd side > Cluster IP - 192.168.1.1 > Firewall 1 - 192.168.1.2 > Firewall 2 - 192.168.1.3 > > Sometimes I can only ping the interfaces of Firewall 1 and the Cluster IP's > Sometimes I can only ping the interfaces of Firewall 1 and Firewall 2 but > not the Clutser IP's > > SmartView Status reports everything fine, and shows Firewall 1 as active > and Firewall 2 as standy. > Ive worked with many other vendors firewall clusters and I could always > ping all interfaces and cluster IP's. -- Ted Serreyn Serreyn Network Services, LLC http://www.serreyn.com/ ================================================= To set vacation, Out Of Office, or away messages, send an email to [email protected] in the BODY of the email add: set fw-1-mailinglist nomail ================================================= To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================= If you have any questions on how to change your subscription options, email [email protected] =================================================
|