[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [FW-1] Ip forwarding using the secureclient.
- To: [email protected]
- Subject: Re: [FW-1] Ip forwarding using the secureclient.
- From: "Roelandts, Guy" <[email protected]>
- Date: Fri, 14 Feb 2003 08:23:57 +0100
- Reply-to: Mailing list for discussion of Firewall-1 <[email protected]>
- Sender: Mailing list for discussion of Firewall-1 <[email protected]>
- Thread-index: AcLTm3TG/AOYwB8+Qq61jQy9lAC0pAAXnG4g
- Thread-topic: [FW-1] Ip forwarding using the secureclient.
Title: Ip forwarding using the secureclient.
Adriano,
As far as I recall, you can't. If SR/SC sees that you are
configured as a 'router' it
will
disable itself. Look in the archives this has been asked/answered
before.
Met vriendelijke groeten - Bien à vous -
Kind regards
Guy
ROELANDTS
EMEA GS Internet Expertise Centre - CCSE-NG
Hewlett-Packard Belgium
B.V.B.A./S.P.R.L.
E-mail : [email protected]
Tel: +32(02)729.77.44 (options 3 - 3 - 1)
Fax: +32(02)729.77.65
==========================================================
This
message may contain confidential and/or proprietary information,
and is
intended only for the person/entity to whom it was originally
addressed. The
content of this message may contain private views and
opinions which do not
constitute a formal disclosure or commitment
unless specifically stated.
Should you receive this message by mistake
please inform the sender
immediately.
==========================================================
Hi,
Can I use the secureclient on a computer sharing the internet
connection?
I need to estabilish a VPN between the
server 1 and the firewall, and then to access the internal network thru the
server 1.
Server 2 -----> server1 <------vpn using
secureclient---> firewall NG FP3---- > internet
On the server 1, i have the w2k internet connection
sharing...and the secureclient installed.
Thank you,
Adriano
