[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [FW-1] static NAT does not work on FP3
Hi Jeroen, First off all thank you for your answer. But look at my first mail. I wrote that I`ve had this options in my objects! Even so it does not work. > If you check the "automatic arp configuration" the Firewall will only do > the arp if you use the nat option in your objects. If you don't have > that, it will not bother to look at your local.arp even if you have > entries in it. > So, what I found is that you have two options: > -Go with automatic arp, and use the nat settings in the objects you want > to nat. > (making double nat lines for inbound/outbound, routing handled by the fw > daemon) > -Go with the traditional method. > (manual local.arp, manual update routing table) > Personally, I still fancy the old way, but it looks like cp is pushing > towards the automatic settings....sad but true... And exatly for this reason I`m attempting to use the new way. But I`m not one step farther. :-( Thomas ================================================= To set vacation, Out Of Office, or away messages, send an email to [email protected] in the BODY of the email add: set fw-1-mailinglist nomail ================================================= To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================= If you have any questions on how to change your subscription options, email [email protected] =================================================
|