[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[FW-1] Static NAT problem
I'm trying to NAT the 10.1.22.7 with the 192.168.2.7 address and i did a
static NAT in the firewall (4.1). When i try to access the 192.168.2.7 (this
machine it's not directly connected to the firewall) it is correctly
translated by the firewall (that's what the logs says) but on the outside
interface i have the same destination address (see the tcpdump below)
FIREWALL LOG:
20:03:06 accept fw1 >eth3 proto tcp src 10.0.18.252 dst 192.168.2.7 service
telnet s_port 49666 len 44 rule 175 xlatesrc 10.0.18.252 xlatedst 10.1.2.7
xlatesport 49666 xlatedport telnet
TCPDUMP IN OUTUP INTERFACE:
20:03:44.388822 IP 10.0.18.252.49666 > 192.168.2.7.23: S
366463681:366463681(0) win 4128 <mss 556>
20:03:44.388826 IP 10.0.18.252.49666 > 192.168.2.7.23: S
366463681:366463681(0) win 4128 <mss 556>
Can someone help me here?
Antonio
=================================================
To set vacation, Out Of Office, or away messages,
send an email to [email protected]
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
[email protected]
=================================================