[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FW-1] policy install failure on FW-1 cluster

Title: Message
redo putkeys to both and the management station. check time sync.
-----Original Message-----
From: Mailing list for discussion of Firewall-1 [mailto:[email protected]] On Behalf Of Firewall Security
Sent: 11 December 2002 15:54
To: [email protected]
Subject: [FW-1] policy install failure on FW-1 cluster

-Hello-
 
Today when I tried to push a policy to our firewall cluster I received the following error:
 
=====================================
Our setup:
Twin Nokia ip440s (in vrrp mode) sp5a ipso, 3.4.1
=====================================
 
ERROR MSG:
 
policyname.W: Security Policy Script generated into policyname.pf
policyname:
Compiled OK.
 
Downloading Security Policy C:\WINNT\FW1\4.1\conf\WMLFWRUN2.pf to firewallname-gc
Downloading pxmail (member of firewallname-gc)
Downloading member firewall1 succeeded
 
Downloading pxmail2 (member of firewallname-gc)
Downloading member firewall2 failed: Connection refused
Downloading to cluster firewallname-gcpartially succeeded (1 from 2)
 

Installing Security Policy C:\WINNT\FW1\4.1\conf\WMLFWRUN2.pf on all.all@firewallname (member of firewallname-gc)
Installing Security Policy on firewall1 succeeded
 

Installing Security Policy on Cluster firewallname-gc did not complete
 
Done.
 
 
The secondary (backup) firewall is online, reachable via ICMP (internally) telnet and via voyager.  Nothing is even showing up in the logs.  Ideas?
 
We would apperciate any help!