I typicall do most HA using Nokia when it
comes to checkpoint. As that's not
your platform, I thought I'd suggest one other option... I've
used something called 'rainwall', which is a hardware solution,
with good success on other systems. You
can get two of them, and trunk/tag them together with your switch configuration
for a good solution. Kind of pricey, but
good stuff. www.rainfinity.com I believe.
--Dave
-----Original Message-----
From: Rob Rutherford
[mailto:[email protected]]
Sent: Wednesday, November 06, 2002
2:23 PM
To:
[email protected]
Subject: [FW-1] Clustering
I am looking to cluster my
firewall setup.. I currently have 10.. going upto 20 NG boxes. I am running 1
on 2000 and the remainder on Linux... the 2000 box is at my central site.. the
rest spoke off it due to a critical application at the central site.
I want to make firewall to be as
solid as possible at my main site. I want to cluster... Can anyone give me some
advice on the best way to achive this? I have read a bit about Stonebeat and
ClusterXL... any advice out there on what I should be doing at my main site to
add resillience?
I understand I am only touching
the surface but would like some guidance on where to should be focussing.
********************************************************************
This E-mail and any files transmitted with it are in
commercial confidence and intended solely for the
use of
the individual or entity to whom they are addressed.
If you have received this E-mail in error please
notify the
Administrator by E-mail ([email protected]).
Any views or opinions expressed are solely those of
the
author and do not necessarily represent those of
DEK International, or its affiliates.
********************************************************************
This footnote signifies that this message has been
checked for viruses using Norton and McAfee.
********************************************************************
================================================To set vacation,
Out Of Office, or away messages, send an email to
[email protected] in the BODY of the email add: set
fw-1-mailinglist nomail ================================================To
unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================If you have any questions on
how to change your subscription options, email [email protected]
================================================
