| |
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [FW-1] Linksys & VPN-1
- To: [email protected]
- Subject: Re: [FW-1] Linksys & VPN-1
- From: "Miller, Curt A." <[email protected]>
- Date: Tue, 27 Aug 2002 14:29:39 -0400
- Reply-to: Mailing list for discussion of Firewall-1 <[email protected]>
- Sender: Mailing list for discussion of Firewall-1 <[email protected]>
- Thread-index: AcJN93yj+JslSebdTASCbVUyAiYGuAAAAv0A
- Thread-topic: Re: [FW-1] Linksys & VPN-1
Moses,
We had the same problem until we upgraded our SR. What build are you
using. It is mentioned in the release notes of SR that it supports
PPPOE as of that release. I think it was 4199.
Curt
-----Original Message-----
From: Hernandez, Moses [mailto:[email protected]]
Sent: Tuesday, August 27, 2002 11:48 AM
To: [email protected]
Subject: Re: [FW-1] Linksys & VPN-1
I'm having serious problems as well. I am in an area were the major
TelCo is the big DSL provider. They use PPPOE (thank you bellsouth.net).
None of my users can connect so far. The issue i think is they may be
blocking VPN unless you have the Business class service. Will the
SofaWare solution fix this? We are going to try and demo it and see. I
am wonderinng only because i think the SofaWare box may use PPTP and not
IPSec. Anyone have a similar theory?
-----Original Message-----
From: Lars Troen [mailto:[email protected]]
Sent: Tuesday, August 27, 2002 9:54 AM
To: [email protected]
Subject: Re: [FW-1] Linksys & VPN-1
Yes. It uses udp 2946 and tcp or udp 500. This is not valid for site to
site vpn's, only client vpn's (securemote/secureclient).
Lars
> -----Original Message-----
> From: Andrea Coppini [mailto:[email protected]]
> Sent: Tuesday, August 27, 2002 11:45
> To: [email protected]
> Subject: Re: [FW-1] Linksys & VPN-1
>
>
> I would also like to know this.
>
> -----Original Message-----
> From: Rob Patrick [mailto:[email protected]]
> Sent: 27 August 2002 12:45 AM
> To: [email protected]
> Subject: Re: [FW-1] Linksys & VPN-1
>
>
> Some VPN solutions allow tunneling the IPSEC packets across UDP or
> TCP.
>
> Cisco VPN, as one example, allows the user to tunnel IPSEC through
> either UDP or TCP packets - just set the gateway appliance with a
> given port (default is 10000) and you're running with a VPN solution
> that traverses
> most firewalls (especially when using TCP) and carriers like
> Comcast can't
> block (you could tunnel out port 80 or whatever is known open).
>
> Does VPN-1 provide any capability to transparently tunnel IPSEC across
> either TCP or UDP?
>
> ----- Original Message -----
> From: "Scott Friedman" <[email protected]>
> To: <[email protected]>
> Sent: Monday, August 26, 2002 3:31 PM
> Subject: Re: [FW-1] Linksys & VPN-1
>
>
> > Also find out what kind of broadband connection he has. I called
> > Comcast and they informed me that they are blocking VPN's on their
> > cable networks for Home users (the NON-Pro version).
> >
> > If they are, he will be able to get the topology of the
> site but won't
> > be able to Key Exchange when it tries to encrypt.
> >
> > -----Original Message-----
> > From: John Chalifoux [mailto:[email protected]]
> > Sent: Monday, August 26, 2002 11:36 AM
> > To: [email protected]
> > Subject: Re: [FW-1] Linksys & VPN-1
> >
> >
> > Have your user setup his PC in a DMZ on the Linksys router and than
> > try it again. I think he might be getting a port blocked by
> the router
> > and if he moves it to the DMZ and it works than you will
> have to find
> > the port
> number
> > being blocked and setup forwarding on the router.
> >
> > John
> >
> > -----Original Message-----
> > From: Mailing list for discussion of Firewall-1
> > [mailto:[email protected]]On Behalf Of
> > Stephan Dubeau
> > Sent: Monday, August 26, 2002 10:00 AM
> > To: [email protected]
> > Subject: [FW-1] Linksys & VPN-1
> >
> > HI all
> >
> > I got a user trying to access the office from is home. He's behind a
> Linksys
> > router, the router gets is valid IP from is cable
> modem(ISP). The user
> > computers behind the Linksys use 192.x.x.x address from the device
> > DHCP.
> >
> > The home user also use SecureRemote to connect to the office
> > FW-1/VPN-1 Firewall 4.1 SP5. The authentification process
> goes find, I
> > look at the
> log,
> > the user is log into FW...OK. User then try to browes thru different
> > share on the internal network, try to start VNC to connect to is
> > office
> computer,
> > but nothing work, no respond from the office internal network.
> >
> > The internal network base address is 10.1.x.x.
> >
> > Is there something I have to do on the FW-1 to give access to this
> > user to our office internal ressource or does he need to configure
> > something on is Linksys?
> >
> >
> > Thanks
> > Stephan Dubeau
>
> =================================================
> To set vacation, Out Of Office, or away messages,
> send an email to [email protected]
> in the BODY of the email add:
> set fw-1-mailinglist nomail
> =================================================
> To unsubscribe from this mailing list,
> please see the instructions at
> http://www.checkpoint.com/services/mailing.html
> =================================================
> If you have any questions on how to change your
> subscription options, email
> [email protected]
> =================================================
>
> =================================================
> To set vacation, Out Of Office, or away messages,
> send an email to [email protected]
> in the BODY of the email add:
> set fw-1-mailinglist nomail
> =================================================
> To unsubscribe from this mailing list,
> please see the instructions at
> http://www.checkpoint.com/services/mailing.html
> =================================================
> If you have any questions on how to change your
> subscription options, email
> [email protected]
> =================================================
>
=================================================
To set vacation, Out Of Office, or away messages,
send an email to [email protected]
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
[email protected]
=================================================
=================================================
To set vacation, Out Of Office, or away messages,
send an email to [email protected]
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
[email protected]
=================================================
=================================================
To set vacation, Out Of Office, or away messages,
send an email to [email protected]
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
[email protected]
=================================================
|
|
