Re: [FW-1] Connection cannot be initiated-NG FP2

Subject: Re: [FW-1] Connection cannot be initiated-NG FP2

From: Frederico Augusto <[email protected]>

Date: Tue, 13 Aug 2002 17:06:52 -0300

Reply-to: Mailing list for discussion of Firewall-1 <[email protected]>

Sender: Mailing list for discussion of Firewall-1 <[email protected]>

Title: Message

I had the same problem eith my nokia box after upgrading tp FP2 . So far , the only solution was to re-install the Firewall. Not a very good idea......

Frederico

----- Original Message -----

From: Jayme Hoburn

To: [email protected]

Sent: Tuesday, August 13, 2002 1:18 PM

Subject: Re: [FW-1] Connection cannot be initiated-NG FP2

make sure the ip address of the system you are connecting from is in the $FWDIR/conf/gui-clients file.

-----Original Message-----
From: Dialogue, David [mailto:[email protected]]
Sent: Tuesday, August 13, 2002 10:22 AM
To: [email protected]
Subject: Re: [FW-1] Connection cannot be initiated-NG FP2

I'm having the same issue with NG FP2. Has anyone found a fix and/or workaround for this problem? I have tried all suggestions in this mailing list thus far with no success. Thanks for any additional help/suggestions.

Dave Dialogue

Idacorpenergy

-----Original Message-----
From: Singh, Hira [mailto:[email protected]]
Sent: Friday, July 05, 2002 1:30 AM
To: [email protected]
Subject: [FW-1] Connection cannot be initiated-NG FP2

I've installed CheckPoint NG under WinNT4 SP6 no problems. Installed
was the Enterprise Management & Enforcement Module for FW-1/VPN-1. I added
an administrator with w/r access and added the IP of a GUI client. From the
GUI client, I can ping the FW-1/Management server, also can ping GUI
client from the MS. When I try to connect to the MS using the NG Log Viewer
or Policy Editor, I get the following error: 'Connection cannot be
initiated. Make sure that the Server 'x.x.x.x' is up and running.'

Please Suggest.