[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [FW-1] High Availability with diferent MAC's
- To: [email protected]
- Subject: Re: [FW-1] High Availability with diferent MAC's
- From: Lars Troen <[email protected]>
- Date: Fri, 9 Aug 2002 00:09:40 +0200
- Reply-to: Mailing list for discussion of Firewall-1 <[email protected]>
- Sender: Mailing list for discussion of Firewall-1 <[email protected]>
- Thread-index: AcI+8BdivniqDzDbTAmrs65JAmDtEAANv26w
- Thread-topic: High Availability with diferent MAC's
Title: High Availability with diferent MAC's
Yes,
you can do it, but you will have to make an arp broadcast when there's a
failover. This you must setup manually. Also, this is slower than using the same
MAC address and you will most likely have a network outage for 5-7 seconds
during the failover.
If
sessions are dropping... Are your syncing working? Are the firewall clocks
sychronized?
Lars
Hi all.
Is posible to configure HA with diferent
MAC's?
We´re using HA with the same MAC and IP address,
but we're having problems with our switches, some of our established sessions
cut or have delays to connect.
thanks in advanced.