|
|
|
|
|
|
|
|
 |
 |
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [FW-1] Routing Question
> Trying to access the DMZ, or even the FW's internal NIC from a second site > behind a second router fails on the local router's > serial link. Now that I've confused everyone, let me try an example: > > - Router1 has an ISDN link on s0 (10.10.0.1) to Router2 on s0 (10.10.0.2) > - Router2 has an ethernet port leading to a LAN (10.20.0.1) > - The firewall's internal ip is 10.20.0.254 > - The firewall's DMZ ip is 10.30.0.254 > > Routes are added on both routers to get to the DMZ, and it works fine on the > 10.20.0.0 network, but trying to get to the FW's internal > ip or the DMZ from either 10.10.0.1 or anything behind it only gets as far > as 10.10.0.2. What are the route statements you have added to the routers? How do you know traffic is only reaching 10.10.0.2? -Don ================================================= To set vacation, Out Of Office, or away messages, send an email to [email protected] in the BODY of the email add: set fw-1-mailinglist nomail ================================================= To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================= If you have any questions on how to change your subscription options, email [email protected] =================================================
|
||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
