[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [FW-1] SecureRemote with internal IP
Dear all, I've still not figured out how to connect a secureremote client with an internal IP. We also used a sniffer to capture the traffic between nodes. The problem I encountered is. SecureRemote (192.168.1.x) --> (192.168.1.200) Firewall (202.175.x.200) --> (202.175.x.201) FW-1 (10.1.1.1) ---> 10.1.1.2 Web server We are running fw-1 v4.1 with sp5 IKE, IP pool with encapsulation. We found that the request from the client can reach the web server and the web server also responsed back to the FW-1; we saw a traffic sent from the web server back to the fw-1. However, the fw-1 was not responding. There was nothing happened in the fw-1. n.b. we did not put any routers between the above setting. We only set routing in each machine. The traffic could pass throught if we set the rules widely open. Can any one help on this issue? We have been testing this case for two months. Regards Terry ================================================= To set vacation, Out Of Office, or away messages, send an email to [email protected] in the BODY of the email add: set fw-1-mailinglist nomail ================================================= To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================= If you have any questions on how to change your subscription options, email [email protected] =================================================
|