| |
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[FW-1] NG on IPSO 3.4.2 on IP530
- To: [email protected]
- Subject: [FW-1] NG on IPSO 3.4.2 on IP530
- From: Aeon Hale <[email protected]>
- Date: Fri, 8 Mar 2002 10:05:21 -0500
- Reply-to: Mailing list for discussion of Firewall-1 <[email protected]>
- Sender: Mailing list for discussion of Firewall-1 <[email protected]>
- Thread-index: AcHGHPi6wqNEmz1nSiuohGqcQrvvhgAlavEA
- Thread-topic: NG on IPSO 3.4.2 on IP530
> what's goin on all. I just finished setting up 2 nokia 530s with HA
> running CP NG FP1. Management station is Win2k on Dell. Both
> machines work fine, High availability works fine. There are two
> things that bother me. The major one is that on the second nokia box
> (the secondary) it takes a very long time to push policy. In fact, if
> I leave the system status window open, it says its disconnected for a
> short time, then connected again after teh policy actually gets to the
> box. The other nokia works fine. Also, when I console or telnet to
> the second nokia box and just run a FW command like fw stat, it takes
> forever. It's definately slower than the NOKIA1.
>
> Second issue is that it was told that when do a netstat -na i should
> see established connections between the link port for the state sync.
> But i do not see this. I ran fw tab -t connections -s and the id and
> amount of connections is the same so that would tell me that they are
> in sync, but the connection doesn't show up in the netstat. When i
> run cpconfig, i have an option to start "Checkpoint HA/State
> sync"....this is not running. Is it supposed to? I didn't think it
> needed to be since i wasn't using checkpoint for HA, but nokia.
> Please let me know if i'm doing this wrong.
>
> Thanks in advance...
>
> Aeon
=================================================
To set vacation, Out Of Office, or away messages,
send an email to [email protected]
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
[email protected]
=================================================
|
|
