| |
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[FW-1] My Linksys-Securemote input
I finally got it working last night. It only took me three months. Anyway, I
hope this helps some of you.
Here's my configuration:
Firewall-1 4.1 SP4
Objects.C configured as shown in Phoneboy
VPN1_IPSEC_encapsulation service defined
Firewall object
IKE Encryption Scheme defined with pre-shared secret
Users configured for IKE with
preshared secret password
uncheck FWZ scheme
Securemote 4.1 SP5
Force UDP Encapsulation
IKE over TCP
Linksys BEFSR41 1.40.2
Everything else left default
Here are some tips:
When I made the changes to ojbects.C, I removed all other objects.C files
from that directory during the following policy install.
Watch the logs to see if the client is attempting a FWZ or IKE install. Make
sure it's IKE. That was my problem.
On the Linksys router, I did not have to make any changes. Possibly because
I used the latest firmware. However, I did have to do a DHCP renew. If you
can, use Link Logger to track the in/out packets.
I'm not sure if I had to upgrade my firewall to SP4, but I did it to be
safe.
I'm not able to connect two Securemote sessions on the same Linksys router
yet. If anyone has any info on that, please post it.
Hope this helps. It's been a load off my back now =)
John
=================================================
To set vacation, Out Of Office, or away messages,
send an email to [email protected]
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
[email protected]
=================================================
|
|
