[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [FW-1] AW: [FW-1] Using Cisco IOS firewall feature set
Title: Message howzit
dude!
speak
to your local friendly DD folks, there have been some installations of IOS fw
set at clients, although I haven´t done any.
cheers
corne
I am looking
at complimenting our FW-1's with switches installed with
the Cisco IOS firewall feature set.
I would like
to implement this on 6500 switches also using layer 3 switching so
inspection can be done on switches and not on fw nic.
We primarily would
like to reduce unessesary internal to internal traffic.
We will use the
Cisco Policy Manager version 3 which appears to be similar to the FW-1 GUI and
not commandline.
There doesn't
appear to be many people using the IOS firewall feature set and it appears
quite apt and manageable.
I am aware of the
TCP\UDP only inspection limitation of CBAC.
Does anyone used the IOS firewall in production and
can give advice?
Are there any peformance
comparisons?
Regards
Eric
*** Disclaimer: The information in
this email is confidential and is intended solely for the addressee(s). Access
to this email by anyone else is unauthorised. If you are not an intended
recipient, you must not read, forward, print, use or disseminate the
information contained in the email. Any representations (contractual or
otherwise), views or opinions presented are solely those of the author and do
not necessarily represent those of the employer or any of its
affiliates.
|