[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [FW-1] SecuRemote access via GPRS mobile
hi,
At 17:07 15.01.2002 +0000, Michael Haller wrote:
I'm getting "no-ip protocol in use" errors during authentication
when I try to connect via my mobile using GPRS. If I uncheck
"only TCP/IP protocols are used" I no longer get the above error
but I still can't connect to the protected network. It is not
clear why (i.e., nothing in log).
Has anybody had any success connecting via a GPRS network? If
so can you tell me what I need to do?
does it work with "normal" internet-access?
with GPRS, you normally get private IP-addresses with a NAT-device at your
gsm-provider. ask your gsm-provider to setup a APN for you with official
IP-addresses for the client and no filtering between the client and the
internet.
cheers
-reinhard
--
Reinhard Stich, ASSIST [email protected]
Internet Security AG, 1190 Wien, Nussdorfer Laende 29-33
Tel: +43 1 370 94 40 RS784-RIPE Fax: +43 1 370 94 40-10
=================================================
To set vacation, Out Of Office, or away messages,
send an email to [email protected]
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
[email protected]
=================================================
