| |
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[FW-1] StoneSoft Full Cluster and FW-1 crashes at boot with alias interface
- To: [email protected]
- Subject: [FW-1] StoneSoft Full Cluster and FW-1 crashes at boot with alias interface
- From: Brian Carroll <[email protected]>
- Date: Mon, 7 Jan 2002 17:39:38 -0500
- Reply-to: Mailing list for discussion of Firewall-1 <[email protected]>
- Sender: Mailing list for discussion of Firewall-1 <[email protected]>
- Thread-index: AcGXzDCONQTkV1dBRC+NbezscPS/Mw==
- Thread-topic: StoneSoft Full Cluster and FW-1 crashes at boot with alias interface
Firewall-1 4.1 SP5
StoneSoft's FullCluster 2.0 SP5
Solaris-8 (kernel patch level and qfe drivers match Stonesoft's recommendations)
E220R with single 450mhz proc
If I configure one interface for the internal LAN in the manner described in the Stonesoft manual, i.e. use a dedicated IP on the "main" interface (qfe4, 172.17.62.90) and the virtual IP on an alias interface (qfe4:1, 172.17.62.92), my install crashes. It crashes with a message:
Panic CPU 0 thread=705 Bad Trap Type=31 occurred in module qfe due to a NULL pointer deference
The interfaces are both defined in the firewall-1 objects. The "sbif accept" mod to /etc/fw.boot/ifdev has been done. Remove the alias and it boots OK.
Any help would be greatly appreciated.
Brian
=================================================
To set vacation, Out Of Office, or away messages,
send an email to [email protected]
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
[email protected]
=================================================
|
|
