[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [FW-1]
i am using fw-1 on nt .it is working fine.but i want to configre it to as follows set of people only for email access set of people only for internet access i ty like this i create user i create groups if i put rules and servises it is not working clients are using tcp/ip .how i popup password if their are try to access internet. plese try to advise me saman ----- Original Message ----- From: "MURAT BALKAS" <[email protected]> To: <[email protected]> Sent: Tuesday, November 27, 2001 6:10 AM Subject: [FW-1] > Hi, > > I've some problems about multicast & checkpoint FW1. I posted > following messages to ipmulticast mailing list but I couldn't get any > answers. Do you have any opinion? > > Thanks, > Murat > > ----- Forwarded by MURAT BALKAS/IS/OKSIJEN on 11/26/2001 05:36 PM ----- > > Hi, > > I'm trying to route multicast traffic through Checkpoint FW1 4.1 SP3 > installed on Solaris 7. This's my test firewall and not connected to real > world. It has two interfaces. 172.21.2.0/24 and 192.168.52.0/25 networks. > I'm using timecast server and client to test the multicast routing. And the > router is mrouted 3.8 > > If firewall is stopped, everything's Ok. Time is synchronized. But, If > I start the firewall everything stops working. Time is not synchronized and > I can't see anything on Firewall logs. If I run mrouted with -d 3 I can see > that the client does not send new member report. > > I couldn't find the problem. Any help would be greatly appreciated. > > Murat > > FYI : Anti-spoofing is off and any to ant on any ports allowed on my > firewall. > > ---------------------------------------------------------------- > > Hi, > > after continuing some tests I found following. > > 1) I stopped the firewall. > 2) run the client and the server. Saw that time synchronized regularly. The > client and server joined the default group 234.5.6.7 and they communicated > through default port 8910. > 3) kept the client and server running and started the firewall with the > rule that accepts all traffic. > 4) time gets synchronized during 2-3 minutes > 5) after a while saw following messages on the console from mrouted. > > 17:03:12.232 ageing entries > 17:03:13.232 group 234.5.6.7 left on vif 1 > 17:03:13.232 delete lclgrp ( 172.21.2/24 234.5.6.7 ) gm:1 > 17:03:14.232 group 234.5.6.7 left on vif 0 > 17:03:14.232 delete lclgrp ( 172.21.2/24 234.5.6.7 ) gm:0 > > 6) after these messages time does not get synchronized. > > The fourth item says me that multicast routing works when the firewall > is on. I think that my problem is about igmp messages. What do you think? > How can I solve this prolem? > > Murat > > =============================================== > To unsubscribe from this mailing list, > please see the instructions at > http://www.checkpoint.com/services/mailing.html > =============================================== > =============================================== To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ===============================================
|