[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [FW-1] Log problem.
- To: [email protected]
- Subject: Re: [FW-1] Log problem.
- From: "Roelandts, Guy" <[email protected]>
- Date: Wed, 21 Nov 2001 09:35:34 +0100
- Reply-to: Mailing list for discussion of Firewall-1 <[email protected]>
- Sender: Mailing list for discussion of Firewall-1 <[email protected]>
- Thread-index: AcFyBe6Oa3BzgH0xTaSdrwrXG2QzAQAYR/CA
- Thread-topic: [FW-1] Log problem.
Marcelo,
Most probably you still have a putkey problem, that's it
most of the time, have you followed the
Also look at the status op port 257/TCP on both systems ? Do
you see a connection in the
ESTABLISHED state on both systems ?
Met vriendelijke groeten - Bien à vous - Kind
regards
Guy ROELANDTS
EMEA GS Internet Expertise Centre - CCSA &
CCSE
Compaq Software Engineer -
Belgium
E-mail : [email protected]
Tel: +32(02)729.77.44 (options 3 - 3 -
1)
Fax:
+32(02)729.77.65
========================================
This message may contain confidential and/or proprietary
information,
and is intended only for the
person/entity to whom it was originally
addressed. The content of this message may contain private views
and
opinions which do not constitute a
formal disclosure or commitment
unless
specifically stated. Should you receive this message by mistake
please inform the sender immediately.
========================================
Hello
alll,
I have one site (site A)
with a Firewall-1 module version 4.1 instaled and this module is doing log on
another machine at another site (site B) that has the management module
and another firewall module. Last month i had to change my valid ip addresses
at site A and the firewall at this site stoped to log into site B.
I perform "fw putkey" after change
the ip.
Any suggestion??
Thanks in
advance,
Marcelo.