[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [FW-1] Too many FireWall Modules (#) in Network Objects: Lice nse is only for 1
- To: [email protected]
- Subject: Re: [FW-1] Too many FireWall Modules (#) in Network Objects: Lice nse is only for 1
- From: Vincent Ridderikhoff <[email protected]>
- Date: Tue, 20 Nov 2001 15:55:30 +0100
- Reply-to: Mailing list for discussion of Firewall-1 <[email protected]>
- Sender: Mailing list for discussion of Firewall-1 <[email protected]>
Title: Too many FireWall Modules (#) in Network Objects: License is only for 1
Problem seems to be solved. Somehow it had something to
do with the 4.0 licenses.
I
removed the 4.1 installation, removed 4.0. Reinstalled 4.0 with the correct
licenses and then upgraded again to 4.1. After this everything came up like a
charm....
Still
seems weird though....
I
looked as though the FW still thought it was a 4.0 although 4.1 was installed
allready. And since I had only one license on 4.0 that would have been the
problem.
Well,
it all works just fine now...
Thanks...
Greetz
Vincent.
-----Original
Message-----
From: Roelandts, Guy
[mailto:[email protected]]
Sent: Tuesday, November 20, 2001
3:19 PM
To:
[email protected]
Subject: Re: [FW-1] Too
many FireWall Modules (#) in Network Objects: License is only for
1
Vincent,
What
kind of license do you have for the Management ? It seems you have the 1 node
license
not
the unlimited version.
Met vriendelijke groeten - Bien à vous - Kind
regards
Guy ROELANDTS
EMEA GS Internet Expertise Centre - CCSA &
CCSE
Compaq Software Engineer -
Belgium
E-mail : [email protected]
Tel: +32(02)729.77.44 (options 3 - 3 -
1)
Fax:
+32(02)729.77.65
========================================
This message may contain confidential and/or proprietary
information,
and is intended only for the
person/entity to whom it was originally
addressed. The content of this message may contain private views
and
opinions which do not constitute a
formal disclosure or commitment
unless
specifically stated. Should you receive this message by
mistake
please inform the sender
immediately.
========================================
I keep getting the following error when I stop
the firewall:
Too many FireWall Modules (#) in Network
Objects: License is only for 1
Condition is as follows.
I have an FW and MGMT module on one system and an
FW on another. The FW cannot connect to the MGMT module. (Both are 4.1 sp5).
Could the above error have something to do with it? or should I look at
something else. I've found a sollutions at checkpoint to avoid above
senario, but haven't tested is yet (still looking for my 4.0 license). But I
have tried everything else with the fw putlic command....
Anyone have any idea?
Thanks.
Greetz Vincent Ridderikhoff.