[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [FW-1] MAIL and LINUX
Hi, on linux you don't need the local.arp file. If you use Static-NAT you can enable proxy_arp on the external interface by putting this line in your /etc/rc.d/rc.local. And this is if your external interface is 'eth0'. echo "1" >/proc/sys/net/ipv4/conf/eth0/proxy_arp then if you use the local firewall sendmail as an SMTP-relay you need to activate sendmail on the network-interfaces (by default it is only active on loopback interface). This setting you will find in /etc/mail/sendmail.mc. best regards //Claes Jansson At 09:20 2001-11-14 -0500, you wrote: Hello,
|