[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [FW-1] Problems NATing
I currently have a test setup running CP4.1sp5 on Win2KAdvancedServer. The outside NIC is DHCP which gets a DHCP address from an ISP (this usually stays the same so my FW object reflects the actual IP that is always renewed); this is my only public address. Meanwhile I have my internal NIC on a private address attached to a hub which is then connected to multiple PC's all on the same network segment. I need to set up the multiple PC's on that network segment to initiate and accept internet traffic. Do I need one more public address to NAT the private network segment to or is there a way I can set it up to use the one public address I currently have available? Right now I am setup to NAT one server to the 1 public address but I have problems connecting to the outside world via HTTP; if I run my anti-virus updates for example, it goes out checked for an update and downloads the necessary updates, but when it comes to HTTP, it doesn't seem to complete the 3-way handshake. I have also run into problems getting SMTP through: I check my mail on the private network segment, I can see traffic passing through my FW logs, and I get 20 mail messages but then get a message saying "lost connection"; when I re-retrieve the mail again, I get all the same messages downloaded again; so some weird things are going on which is leading me to think having only one valid addresses, which is being used by my FW's external address is causing some "behind-the-scenes" headaches. Any help, words of wisdom would be greatly appreciated, TIA! Scott
=============================================== To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ===============================================
|