[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [FW-1] Pix - firewall keeps going up and down....loses connection, then comes back
Traceroute is layer 3. I would start troubleshooting this at lower layers. Make sure your cabling ok first. then check any Layer 2 devices before starting to do pings. What does your infrastructure look like. Are you talking rip to your internal, external. Please fill us in... Thanks, Eugene B ----- Original Message ----- From: "Timothy K. Cornelius" <[email protected]> To: <[email protected]> Sent: Monday, November 05, 2001 7:31 PM Subject: [FW-1] Pix - firewall keeps going up and down....loses connection, then comes back > We cutover to a new ISP Friday and are have a itermitant problem. For about > 2-4 minutes the connection is fine, then it stops and you cannot get out for > say 2-5 minutes. We are doing failover, so I thought it might be cutting > back and forth from pix to pix and that was cuasingf the up and down stuff. > But I cut off one of the pix's and it still does the same thing. It is > better after I took out a statement "rip inside passive" and added "no rip > inside passive" this seemed to help. Has anyone had a similar problem or > might know what would cause this? Also traceroutes seem real flaky, they * > out about 2/3 of the time. > > Thanks, > > Tim > > --- > Outgoing mail is certified Virus Free. > Checked by AVG anti-virus system (http://www.grisoft.com). > Version: 6.0.293 / Virus Database: 158 - Release Date: 10/29/2001 > > =============================================== > To unsubscribe from this mailing list, > please see the instructions at > http://www.checkpoint.com/services/mailing.html > =============================================== > =============================================== To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ===============================================
|