[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [FW-1] Incorrect NAT translation
Title: RE: [FW-1] Incorrect NAT translation Hmm... try letting FW-1 auto configure the NAT. -----Original Message-----
Has anyone heard of a problem with NAT translation resolving the http address as the internal ip address rather than the external ip address? We are setting up an http accelerator behind our Nokia 440 firewall where the box must be "seen" from the outside.
Entered "any external any accept" and "internal any any accept" on the security policy tab.
We know our accelerator sees our pings put does not reply. We have our laptop gui infront of the firewall and behind our ext router, and from there we can enter our accelerator happily using internal ip address but not external. From outside the network, the http string automatically changes from external to internal then times out again the accelerator sees these http requests but does not reply. We are so close to cracking it (or ourselves!).
regards, Rory Stewart
===============================================
|