[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [FW-1] Firewall and RH 7.0
The box is Compaq DL380 and I think it has Intel 100Pro. I will schedule the kernel upgrade "asap" and then I'll let you know. Best Regards, -----Original Message----- From: Claes Jansson [mailto:[email protected]] Sent: Wednesday, October 17, 2001 2:34 PM To: [email protected] Subject: Re: [FW-1] Firewall and RH 7.0 Hi, i mean what brand and type. There are nics that work fine and nics that don't work very well (Nic = Network Interface Card). I think u should do this: a) Upgrade the kernel to the latest version supplied from RedHat. ftp://ftp.redhat.com/pub/redhat/linux/updates/7.0/en/os/i686/kernel-smp-2.2. 19-7.0.8.i686.rpm b) If that not works try the non-SMP kernel: ftp://ftp.redhat.com/pub/redhat/linux/updates/7.0/en/os/i686/kernel-2.2.19-7 .0.8.i686.rpm c) If still no progress be sure to check that your nic's are listed in Checkpoints HCL. I recomend Intel 100Pro or 3Com90x. They always work fine on linux. best regards. //Claes Jansson At 13:36 2001-10-17 +0200, you wrote: >Claes, > >What do you mean by "What nic's are u running?" ?I have 3 ethenret >configured and there are no errors on the interfaces. > >The SMP kernel is intalled for default since i have a two cpu system. >CP claims to support RH 7.0 SMP kernel. > >My kernel is: 2.2.16-22smp #1 SMP >The system works really fine and performing. >Do you think i should intall some kernel upgrade? >I dod not patch anything on the system after the first installation. > >What happens if a have 2 CPUS running a non SPM kernel. >Is the NON SMP kerner present on the system or I have to recompile it? > >Best Regards, > > >-----Original Message----- >From: Claes Jansson [mailto:[email protected]] >Sent: Wednesday, October 17, 2001 11:58 AM >To: [email protected] >Subject: Re: [FW-1] Firewall and RH 7.0 > > >What nic's are u running? > >And have u tried with a non-smp kernel? Check this to be sure that it's not >the SMP kernel that mess things up. > >Im currently running i similar enviroment (~2000 users) Rh7 (2.2.19-7.0.8) >+ Cpfw4.1-sp5. My firewall cpu-load is less than 0.1. But im not running >any VPN traffic from the firewall. Hardware is (P3-1Ghz, 256Mb RAM, 2x >Intel Dual Port 100 Pro NIC's, Asus CUSL2-C Motherboard). > >best regards. > > //Claes Jansson > >At 09:32 2001-10-17 +0200, you wrote: > >On the system there is a squid proxy(configured with no disk cache). > >The squid load is about 45 http_req/s during the day, with about 3000 >users. > > > >The system has 512MB RAM and 2 1000Mz Intel CPUs. > > > >Best Regards, > > > > > >-----Original Message----- > >From: Claes Jansson [mailto:[email protected]] > >Sent: Tuesday, October 16, 2001 9:05 PM > >To: [email protected] > >Subject: Re: [FW-1] Firewall and RH 7.0 > > > > > >What load are we talking about? Users and Bandwidth. > > > >best regards, > > > > //Claes Jansson > > > >At 18:28 2001-10-16 +0200, you wrote: > > >I spoke too early...the problem still remains. > > >It happens during the day with higher system load. > > > > > > > > >Bes Regards, > > > > > > > > > > > >-----Original Message----- > > >From: Sommariva Graziano [mailto:[email protected]] > > >Sent: Tuesday, October 16, 2001 10:19 AM > > >To: [email protected] > > >Subject: Re: [FW-1] Firewall and RH 7.0 > > > > > > > > >After ugrading to SP5 no more problems, besides SP3 did not claim to > >support > > >7.0 multiprocessor kernel. > > > > > >Best Regards, > > > > > > > > >-----Original Message----- > > >From: Jochen Höchner [mailto:[email protected]] > > >Sent: Monday, October 15, 2001 11:30 PM > > >To: [email protected] > > >Subject: Re: [FW-1] Firewall and RH 7.0 > > > > > > > > >no works fine !!! > > >do you have enough RAM and hard disk space ??? > > > > > ><<< Sommariva Graziano <[email protected]> 10/15 5:36p >>> > > >Did you have my same problem in sp3? > > > > > >Best regards, > > > > > > > > >-----Original Message----- > > >From: António Cardoso [mailto:[email protected]] > > >Sent: Monday, October 15, 2001 4:26 PM > > >To: [email protected] > > >Subject: Re: [FW-1] Firewall and RH 7.0 > > > > > > > > > > > >Try with sp4 or sp5 i've managed to put one to work with sp4 and another > > >with sp5 > > > > > >António Cardoso > > >[email protected] > > > > > > > > >-----Original Message----- > > >From: Sommariva Graziano [ mailto:[email protected] > > ><mailto:[email protected]> ] > > >Sent: Monday, October 15, 2001 2:44 PM > > >To: [email protected] > > >Subject: Re: [FW-1] Firewall and RH 7.0 > > > > > > > > >I do agree in part. > > > > > >I did excatly what you say, but the system hang 50% of time while >intalling > > >new polices from ManST. It works fine, if it does not freeze. > > > > > >Best regards, > > > > > >-----Original Message----- > > >From: Jochen Höchner [ mailto:[email protected] > > ><mailto:[email protected]> ] > > >Sent: Thursday, October 11, 2001 6:51 PM > > >To: [email protected] > > >Subject: Re: [FW-1] Firewall and RH 7.0 > > > > > > > > >oh, it's no problem. > > >1st you gotta install the rh 7, then the check point 4.1 for linux, but > > >don't start it. after a service pak install sp3 and later it works >without > > >any problem. > > > > > ><<< Aeon Hale <[email protected]> 10/11 12:55p >>> > > >I'm trying to get Checkpoint installed on RH 7.0. It's being a pain. >Basic > > >RH installation. In fact, off the 4.1, SP2 Checkpoint CD, rpm -ih >***.rpm > > >works great. It installs Base version of checkpoint no problem, i think > > >version 414**...not sure of the rest. Anyway, I get it all setup, > >licensed, > > >users, gui-clients, etc....reboot...no prob. I goto upgrade to SP2 or >SP3, > > >it doesn't like that. Says it need CPfw-1 installed first. I run rpm >-u > > >..rpm --nodeps (which usually works in the past) and it > > >installs....doesn't seem to be giving me grief. I goto reboot...KERNEL > > >PANIC... > > > > > >I know somebody out that has successuflly installed this on 7.0. I've >done > > >6.2 way too many times and I'd be happy to stick with it, but RH 6.2 > >doesn't > > >like my AMD Athlon CPU. > > > > > >Any help would be appreciated. > > > > > >Thanks, > > > > > >Aeon Hale > > >Security Engineer > > >CCSA,CCSE,CCSI > > >Accenture > > > > > > > > > >=========================================================================== > >= > > > > > >==== > > > To unsubscribe from this mailing list, please see the instructions >at > > > http://www.checkpoint.com/services/mailing.html > > ><http://www.checkpoint.com/services/mailing.html> > > > >=========================================================================== > >= > > > > > >==== > > > > > > >=========================================================================== > >= > > > > > >==== > > > To unsubscribe from this mailing list, please see the instructions >at > > > http://www.checkpoint.com/services/mailing.html > > ><http://www.checkpoint.com/services/mailing.html> > > > >=========================================================================== > >= > > > > > >==== > > > > > >=============================================== > > >To unsubscribe from this mailing list, > > >please see the instructions at > > >http://www.checkpoint.com/services/mailing.html > > ><http://www.checkpoint.com/services/mailing.html> > > >=============================================== > > > > > >=============================================== > > >To unsubscribe from this mailing list, > > >please see the instructions at > > >http://www.checkpoint.com/services/mailing.html > > >=============================================== > > > > > >=============================================== > > >To unsubscribe from this mailing list, > > >please see the instructions at > > >http://www.checkpoint.com/services/mailing.html > > >=============================================== > > > > > >=============================================== > > >To unsubscribe from this mailing list, > > >please see the instructions at > > >http://www.checkpoint.com/services/mailing.html > > >=============================================== > > > > > >=============================================== > > >To unsubscribe from this mailing list, > > >please see the instructions at > > >http://www.checkpoint.com/services/mailing.html > > >=============================================== > > > > > >=============================================== > > >To unsubscribe from this mailing list, > > >please see the instructions at > > >http://www.checkpoint.com/services/mailing.html > > >=============================================== > > > >=============================================== > >To unsubscribe from this mailing list, > >please see the instructions at > >http://www.checkpoint.com/services/mailing.html > >=============================================== > > > >=============================================== > >To unsubscribe from this mailing list, > >please see the instructions at > >http://www.checkpoint.com/services/mailing.html > >=============================================== > >=============================================== >To unsubscribe from this mailing list, >please see the instructions at >http://www.checkpoint.com/services/mailing.html >=============================================== > >=============================================== >To unsubscribe from this mailing list, >please see the instructions at >http://www.checkpoint.com/services/mailing.html >=============================================== =============================================== To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html =============================================== =============================================== To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ===============================================
|