[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [FW1] *** Problem with qfe card ***
Hello all, I have two Sun Entreprise 220R (FW1 and FW2) with Solaris 2.6 and recommended patches. They are configured as a Stonebeat HA 3.0 cluster running CheckPoint Firewall-1 4.1 SP4. They have a double heartbeat, crossed-cable at hme0 and serial cable at serial port B. They have a qfe card each, with 3 interfaces configured (qfe0, qfe1 and qfe2), qfe0 for external network (internet) and qfe1 and qfe2 for internal networks. FW1 is active and FW2 is standby. Recently i noticed that the qfe card at FW2 (standby) shutts down, like a reset, every 15 secs. I've replaced the qfe card but the problem persists. I noticed that this behaviour isn't causing any service interruptions. I've isolated the machine from the cluster. As soon as it goes online the problem disappears. I forced it offline and connected a PC directly to it. The problem persists. I've connected the PC to the fourth interface (qfe3), witch is not configured through StoneBeat, and no problem with that. I then connected a crossed-cable between qfe3 and the other interfaces alternatly and the interface that was connected at the time to qfe3 through the crossed-cable worked fine. I think that this shouldn't be the normal behaviour, cause I have a similar cluster and I never noticed something like that. Does anybody ever seen something like that? Th4nkz, Rodrigo Borges ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|