[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [FW1] Re: RE: Radius authentication - What shows the eventviewer?
I thorougly checked the event viewer for any logs, no such logs relating to IAS.I have also configured to log sucessful and unsucessful attempts in Win2k.I disconnected the cable from fw-1 and radius server, which showed no difference.I even tried with radius version 1,2 then new radius.there are no differece in behaviour.I searched the mailing lists also.i need a help from you all, thanks mohamed. On Thu, 27 Sep 2001 Samuel Wuethrich wrote : > Take a look at the W2000 eventviewer, what does it > shows related to the > Radius Service? Perisonally, I've seen that the > firewall request was > originating from the inside network address instead of > its external one. > > SAM > > -----Original Message----- > From: mohamed maraikayar [mailto:[email protected]] > Sent: Mittwoch, 26. September 2001 14:58 > To: Brockhoven,Werner > Cc: [email protected] > Subject: [FW1] Re: RE: Radius authentication > > > > > I havent added any rules till now.now i added 2 rules, > from firewallgateway > to raduis server any is allowed and vice versa.Still i > recieve the same > error.i configured a rule as " allusers@any ftp-serv > ftp userauth gateway " > and in the user properties, i enabled radius > authentication for a user,say > mohd.when i ftp to ftp-serv,i get a prompt bcoz of of > user authentication > rule.i entered the username mohd,that is to be > authenticated by radius > server.so fw-1 gave a prompt, "radius password:" ,i > typed the password.then > it took some 10 seconds time and displayed,"radius > servers not responding".i > disconnected the cable from fw-1 to radius server and > tried again,i got the > same error.so i can now conclude that there is some > thing missing in the > configuration of fw-1 or fw-1 related.any clues ? > thanks > mohamed. > > On Wed, 26 Sep 2001 Brockhoven, Werner wrote : > > Hi, > > > > Do you have a rule to allow communication between the > > radius and the FW-1 ? > > What do you get in t ou to send mails to the > > checkpoint mailing list > > and not directly to me personally. > > > > Regards, > > > > Werner > > > > > > -----Original Message----- > > From: mohamed maraikayar [mailto:[email protected]] > > Sent: Wednesday, September 26, 2001 12:41 PM > > To: Brockhoven, Werner > > Subject: Radius authentication > > > > > > > > Sorry, i am sending you a third mail.Now i have made > a > > win 2000 advanced > > server as radius server.i have done the necesary > > configurations ,added the > > client as firewall's interface,defined radius server > > group etc.The win NT > > (SP4), i have installed checkpoint 4.1 (SP2).i have > > defined the radius > > server,shared key etc in check point also.but the > error > > i get is,"Radius > > server not responding" , i searched mailing list also, > > > but didnt get the > > answer.what may be the problem ? > > thanks, > > mohamed. > > > > > > > > > ========================================================- > ==================== > ==== > To unsubscribe from this mailing list, please see > the instructions at > http://www.checkpoint.com/services/mailin- > g.html > ========================================================- > ==================== > ==== ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|