[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] RE: [FW1] SecuRemote not working behind Linksys BEFSR41
I have a similar configuration for my machine at home, using the Linksys router with Secure Remote. In addition to the IPSec and Firmware upgrade I also had to forward port 500 UDP to the client I was connecting from. Once I did this everything worked fine. Hope this helps ! Thanks, Scott Davis Internet Security Specialist T.Rowe Price -----Original Message----- From: Robert Soong [mailto:[email protected]] Sent: Wednesday, September 05, 2001 3:40 PM To: [email protected] Subject: [FW1] SecuRemote not working behind Linksys BEFSR41 I've seen others post that all you need is the latest firmware and IPSec enabled on the Linksys and UDP Encapsulation set on the SecuRemote client. We have tried all that and still can't get it to work. We are using FW1 SP4 3DES. IKE Hybrid Mode. We have tried both 1.37 and 1.39 firmware revisions on the Linksys. We are trying from Time Warner Cable's RoadRunner cable modem service. We are using the latest 3DES build 4185 client. Tried on both W2k and W98 still same results. When trying to access an internal resource, there is no response. Never get the dialogue box to enter a username and passcode. When trying to telnet or ping an internal resource it just times out. Bypass the Linksys and I get the prompt and enter credentials and get in - no problem. Have already tried the doc's on the Linksys and Phoneboy site. Those docs appear to be in reference to PRE-SP4 versions of FW1. Nevertheless, we tried all those settings and changes in the objects.C and still no luck. We didn't think that those changes are necessary with SP4 so we took them out for now. Please help, Thanks, Robert Soong, Systems Administrator [email protected] CFI, Westgate Resorts ============================================================================ ==== To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ============================================================================ ==== ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|