[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] RE: [FW1] IPSO boot manager upgrade on IP300 Series
Tracy, I have upgraded 15 remote boxes using VERY non-technical people through the console. The upgrade went perfect. I did each one with myself on the other line. Before I had them do the upgrade I copied all the necessary files (nkipflash.bin to /etc) to the box and emailed them the procedures on what to do. I then showed them how to create a Hyperterminal session. They then copied and pasted the commands. After the boot manger was upgraded I did the rest remotly. Using SSH for a remote command session and SSL for the Voyager Here is a sample of what I emailed them. (Step 1: Type the following.) Console into NOKIA (Step 2: Type the following.) > sync; reboot (Press Enter) (Step 3: When it is rebooting, you will see this.) > Verifying DMI Pool Data > 1 . . . Bootmgr > 2 . . . IPSO > Default: 1 (When you see the following message, press any key to enter the command mode.) > Loading boot manager..Bootmgr loaded. > Entering autoboot mode. Type any character to enter command (You will then see this; BOOTMGR[0]> ) (Step 4: Type the following.) > boot -s (Press Enter) (Step 5: When you see the following message, press RETURN or ENTER key) > Enter pathname of shell or RETURN for sh: (Step 6: Type the following.) > /etc/upgrade_bootmgr wd0 /etc/nkipflash.bin (Press Enter) (Type Y to continue) > reboot (Press Enter) (Step 7: When it is rebooting, you will see this.) > Verifying DMI Pool Data > 1 . . . Bootmgr > 2 . . . IPSO > Default: 1 (When you see the following message, press any key to enter the command mode. ) > Loading boot manager..Bootmgr loaded. > Entering autoboot mode. Type any character to enter command (You will then see this; BOOTMGR[0]> ) (Step 8: Type the following.) > set-defaults (Press Enter) (Step 9: Type the following.) > printenv (Press Enter) (You should now see somthing in the first line that states this: base kernel=3.4-fcs1 ) ( See example below) > Bootmgr Revision: 3.3,base kernel=3.4-fcs1 02.12.2001.102644 > autoboot: YES > bootwait: 5 > boot-file: /image/current/kernel > boot-flags: > boot-device: wd0 (Step 10: Type the following.) > halt (Press Enter) (Press any key to reboot) I hope this helps Alberto Cardona II -----Original Message----- From: Graff, Tracy [mailto:[email protected]] Sent: Tuesday, August 28, 2001 5:33 PM To: '[email protected]' Subject: [FW1] IPSO boot manager upgrade on IP300 Series Hi, I have recently upgraded my Nokia IP440's to IPSO v3.3 with no problems. I now need to upgrade my Nokia IP330's to IPSO v3.3 which requires a boot manager upgrade at the console. Here's the rub... These boxes are remotely located and I am going to be walking fairly non-technical people through the console part of the upgrade. The instructions are pretty straightforward, but I was wondering if anyone has had any bad experiences with this that I should be aware of. Thanks, Tracy ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Tracy Graff Unix/Firewall Administrator Forum Financial Group Two Portland Square Portland, ME 04101============================================================================ ==== To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ============================================================================ ==== ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|