[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [FW1] FTP on non std port
Hi all, I am trying to allow/configure ftp through a CP 4.1-SP2 but on some non standard high port, I am trying 3120 & 3121, I looked in the archives looked on Phoneboy - Checkpoint knowledgebase - Nokia support site, I found several articles, but most of the time related to 3.* or 4.0 Firewalls. None of them allowed me to have a working config with 4.1 My Control connection works fine, I see the port 3121 allowed, and I can log in, but the data connection gets dropped by the firewall and I see of course the socket in a SYN_SENT state on the FTP server. Has anyone a working example of the things that need to be done to achieve this ? It seems I have to define a service of type other, with the match part being tcp,dport=3121 or a service of type tcp with the service type of FTP. Then I have to hack the base.def file, but the 4.1 seems to be very different from the 4.0 ... and I think that it's that part where I am not doing the right things. Any help greatly appreciated. Met vriendelijke groeten - Bien a vous - Kind regards Guy ROELANDTS EMEA GS Internet Expertise Centre Compaq Software Engineer - Belgium E-mail : [email protected] Tel: +32(02)729.77.44 (options 3 - 3 - 1) Fax: +32(02)729.77.65 ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|