[FW1] Routing in NT with 3 nic's

[Bob Billington <the_chucklingc@FW1-NOSPAMyahoo.com.au>]

Folks,

I have an NT 4 (sp 6a) host with three nics.  The
first has an external IP address (206.43.x.x) and
directly connects to our router.  The second nic has a
192.168.1.x address with static NAT - this is
working!!

My problem is - the third nic.  This nic has an
external IP address (206.67.x.x) and I can not seem to
connect to it from the Internet side of the firewall. 


When I check the routing table, there is an entry for
the 206.67.x.x network and has its gateway as the
address I have assigned at the firewall.  The address
of the nic itself has a gateway of 127.0.0.1.  I have
tried to add a route that points the 206.67.x.x
network to the external interface of the firewall,
however this was unsuccessful.

I have an any any any accept rulebase, and when I
ping, I do not get any joy.

Is this a routing issue? should I be considering proxy
arps's? 

your help would be much appreciated...

thanks


_____________________________________________________________________________
http://shopping.yahoo.com.au - Father's Day Shopping
- Find the perfect gift for your Dad for Father's Day


================================================================================
     To unsubscribe from this mailing list, please see the instructions at
               http://www.checkpoint.com/services/mailing.html
================================================================================