[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] RE: [FW1] FW1: only 256 internal hosts allowed
I have the same problem and I have tried everything on phoneboy's site. It doesn't clear the problem. This is not a case where I would use RTFM, Volker. I've had this problem for 6 months and neither myself nor my reseller can figure it out. We've reviewed the external.if, the fwd.h, and the fwd.hosts file according to CheckPoint and phoneboy with no success. I've gone through the debug process several times. Each time I end up banging my head against the wall. So please consider the fact that this may not be as simple as reading the f%%^ing manual!! Rich -----Original Message----- From: Volker Tanger [mailto:[email protected]] Sent: Wednesday, August 01, 2001 10:12 AM To: [email protected] Cc: [email protected] Subject: Re: [FW1] FW1: only 256 internal hosts allowed Greetings! [email protected] schrieb: > we are running Firewall-1 4.1 SP 1 under Windows NT SP 5 with a localnet and > DMZ. Everthing works fine. > There just one thing that I don't understand: After starting the > Firewall-Service the following error messages occur in the system event > viewer > > FW1: FW-1: setting external interface to x > FW1: FW-1: only 256 internal hosts allowed > > The problem is that we have only 170 internal hosts. > external.if is configured correctly. It's a known problem, for explanation see: http://www.phoneboy.com/faq/0001.html Or short: Checkpoint has problems counting correctly. For solution see: http://www.phoneboy.com/faq/0058.html Bye Volker PS: RTFM? (here: RTFFAQ) -- Volker Tanger <[email protected]> Wrangelstr. 100, 10997 Berlin, Germany DiSCON GmbH - Internet Solutions http://www.discon.de/ ============================================================================ ==== To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ============================================================================ ==== ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|