[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [FW1] Firewall routing issue
Title: [FW1] Firewall routing issue Greetings, I have an issue regarding a management server and a firewall module at a remote site of ours. Environment: Checkpoint FW1 4.1 SP3 Solaris 7. Two sites; a management site(site A) and another office with a firewall module(site B). Also, both sites have an independent T1 connection. Another odd problem is that we have two other site we are hosting that B can get to just fine. This particular site that we are having issues is be Variables: Also, the two sites have a frame relay connected between them allowing the internal networks to communicate. All web sites at site A are load balanced behind a Cisco Local Director. Problem: Site B is having issues communicating with web servers on Site A's DMZ. If I to a tracert from B to a webserver at A(on A's DMZ), It goes to site B's gateway and fails at their firewall. It seems that it should resolve like other internal boxes do at site A. From site A the tracert goes to the gateway, then to the firewall, and finally is directed to the dmz for resolution. The webservers is accessible from the outside world and it seems that we may have a loop between our firewalls and the frame relay. Another possibility we are thinking is that we may have a routing issue. Anyone dealt with a similar issue? Thank you for your time, David W. Frank
|