|
|
|
|
|
|
|
|
 |
 |
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] RE: [FW1] NT Printing through Firewall-1
A thought, FW1 by default does not allow any ports between 1 - 1024 to be used *even* if you have any defined as a rule. This is typically seen with ftp sessions that transfer a lot of files, they end up using that range and the connection is dropped It is possible that as part of the print process a similar thing is occuring????? see http://www.phoneboy.com/faq/0106.html another possibility is that a reverse connection is being initiated and stopped. I take it you are using LPr/LPd for this printing? regards Dean -----Original Message----- From: Alan Baker ( ISC Networks ) [mailto:[email protected]] Sent: Saturday, 7 July 2001 2:41 AM To: '[email protected]' Subject: [FW1] NT Printing through Firewall-1 Hi I'm trying to set up my site so that an external site can print to my internal printer. I have set up an NT 4 machine on the DMZ that happily prints to the internal printer (on a JetDirect box) via an internal NT 4 printserver. The firewall is configured to allow any protocol (at present) through to the DMZ print server. The external site can ping the DMZ print server, and telnet to it. But when trying to print to it, it seems like only 72 bytes are sent and then everything stops. The firewall log shows one entry for each attempt viz: 14:47:17 accept firewall >qe2 proto tcp src RemoteServer dst DMZServer (Valid Address) service 9100 s_port 1223 len 48 rule 41 xlatesrc RemoteServer xlatedst DMZServer xlatesport 1223 xlatedport 9100. Can anyone give me any pointers please? Regards, Alan Baker ISC Networks Tel: (Int +44) (0)1223 877068 Email: mailto:[email protected] _____________________________________________________________________ This message has been checked for all known viruses by Star Internet delivered through the MessageLabs Virus Control Centre. ============================================================================ ==== To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ============================================================================ ==== *************************************************** This e-mail is not an official statement of the Waikato Regional Council unless otherwise stated. Visit our website http://www.ew.govt.nz *************************************************** ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|
||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
