[FW1] urgent help needed for VRRPmc cluster setup

[fw@FW1-NOSPAMlinuxplanet.nu]

I have just setup VRRPmc for HA load sharing on a couple of nokia 650's, layer2 
& 3 seems to work fine. I cant telnet or ssh to the firewall after I do 
fwstart, I can after fwstop.   The rulebase fails to install on the 2nd 
firewall below.  Can anyone help by summerizing how to setup the clustering.  
>From the design below, each fw has 6 virtual ip's which means creating 6 
Gateway Clusters.  How does one make the firewall a member of these clusters. 
In theory my design should work, I just can't get it right on the rulebase, how 
do I create these gw clusters.  The fwclean is connected to the Internal 
network. fwnet connects to the internet, & fwdmz connect to the DMZ.


	|fwnet				      |fwnet2
____________				______|______
|	    |  fwclean1	       		|            |
|	    |----- ---	        ___fwclean2          |
|	    |				|	     |
|___________|				|____________|
	|fwdmz1					|fwdmz2
	|					|



fwnet1						fwnet2
ip 10.0.0.1 (real IP)				ip 10.0.0.2
	vr1 10.0.0.3	priority=50			vr1 10.0.0.4 p=50
	vr2 10.0.0.4	priority=40			vr2 10.0.0.3 p=40
fwclean1					fwclean1
 ip  192.168.0.1					ip  192.168.0.2
	vr1  192.168.0.3  priority=50			vr1  192.168.0.4 p=50
	vr2   192.168.0.4 priority=40			vr2  192.168.0.3 p=40
fwdmz1						fwdmz1
ip  172.134.0.1					ip  172.134.0.2
	vr1  172.134.0.3  priority=50			vr1  172.134.0.4  p=50
	vr2  172.134.0.4  priority=40			vr2  172.134.0.3  p=40



-- 
Get your firstname@lastname email for FREE at http://Nameplanet.com/?su


================================================================================
     To unsubscribe from this mailing list, please see the instructions at
               http://www.checkpoint.com/services/mailing.html
================================================================================