[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] RE: [FW1] How to know the duplex and speed setting of Solaris NIC ??
1) Change /etc/system file and add following lines at the bottom. (replace qfe with hme if you want to force hme interface) set qfe:qfe_adv_autoneg_cap=0 set qfe:qfe_adv_100fdx_cap=1 set qfe:qfe_adv_100hdx_cap=0 set qfe:qfe_adv_10fdx_cap=0 Than reboot the machine. 2) How to check whether its running full duplex (A) you can run /etc/opt/SUNWconn/bin/nettr -debug that will show you the speed. (B) you can run command ndd /dev/qfe link_speed (1 shows 100 MBPS 0 shows 10MBPS) ndd /dev/qfe link_mode ( 1 shows full duplex 0 shows Half duplex) -----Original Message----- From: Sim, CT (Chee Tong) [mailto:[email protected]] Sent: Tuesday, May 15, 2001 9:07 PM To: [email protected] Subject: [FW1] How to know the duplex and speed setting of Solaris NIC?? Hi.. Dear all I have checkpoint installed on a Solaris box. But I don't know how to know the duplex and speed setting of Solaris NIC? Many thanks TOng ================================================================== De informatie opgenomen in dit bericht kan vertrouwelijk zijn en is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en de afzender direct te informeren door het bericht te retourneren. ================================================================== The information contained in this message may be confidential and is intended to be exclusively for the addressee. Should you receive this message unintentionally, please do not use the contents herein and notify the sender immediately by return e-mail. ================================================================== ============================================================================ ==== To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ============================================================================ ==== ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|