[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [FW1] Any have a "how-to" on VPN between networks using the same address space?????
On Thu, 10 May 2001, Mark Pelkoski wrote: > > Hey everybody: > We have another company who wants to set up a LAN-to-LAN VPN between our > two FW-1 Firewalls, but we are both using the same Non-routable subneted > address space. Anybody done this before? I have an idea on how to do it, > but I'm looking for some experience out there so I can learn of the > potential pitfalls. With the world using more hide NATing, I guess this > scenario is inevitable until IPv6 comes along. well, the solution is NAT. I hope that not every workstation has to reach every workstation on the other side. in this case I suggest to change the IP-addresses on one side. if you have only some servers you must be able to connect to - find an unused ip-address (or network) and do manual NATs between this networks. hide-nat for workstations and static NAT for servers. cheers -reinhard ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|