[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] RE: [FW1] Firewall-1 sync problems
Greets... >fwd: Peer (10.10.10.70) denies access for command sync >fwd: Authentication with 10.10.10.70 for command sync failed >what does this mean Looks like your secret key is not set or didn't take properly for the sync... Remember that you have to do an "fw putkey <peer_fw_ip>" on each system to set a password between them... ..also make sure your $FWDIR/conf/sync.conf files are set properly... So if you are using the following configs: [fw1](sync-nic:10.10.10.70)...sync_network...(10.10.10.80:sync-nic)[fw2] on fw1 do: fwstop $FWDIR/bin/fw putkey 10.10.10.80 (enter a password) on fw2 do: fwstop $FWDIR/bin/fw putkey 10.10.10.70 (enter same password) then do an 'fwstart' on each firewall for things to start working... If you still see errors try doing the putkeys without stopping the firewall (i.e. don't do an fwstop), just do the putkey, then fwstop, then fwstart... Amin Tora, CISSP ePlus Technology http://www.eplus.com NASDAQ: PLUS ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|