[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [FW1] Problem incoming connections over windows 2000
Hello: I've got the next problem: I have installed my FW-1 as the following configuration: a valid IP address for the external card of FW-1 (for example 10.0.0.1), and two internal non valid addresses e.g. 192.168.10.254 for my localnet and 192.168.1.254 for my DMZ. In my localnet I have used hidden Nat and the result is successfully, in my DMZ I've put Static NAT using a real Internet Address, also I have put a static route in my FW-1 server as route add -p 10.0.0.25 192.168.1.1 then, if I delete all security rules of FW-1 I can go out using my firewalled machine throw the FW-1, and using a sniffer I can see like the packets are translated but if I try access to my firewalled machine using its real internet address my FW-1 ignores the packets. Resuming, my outgoing connections are OK, but the incoming connections are lost. The problem is not on the security rules because I've put: all all all accept. Also I have put a file called local.apr with the ip of my firewalled machine and my FW-1 external address and the mac address of my external firewall card in the %%systemroot\fw1\4.1\state\ and it seems not work. I'm using FW-1 4.1 SP3 over Win2000 Server. Thanks for all Best Regards Javier ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|