| |
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [FW1] encryption for FW-1 management
actually, firewall-1 control connetions aer allowed as a default. What you
would need to do is go to the global properties and uncheck "enable control
conections"
Be careful as this will need to be allowed in a rule onced unchecked. try a
rule like this first.
src--------------------------------------------------dst----------------------------------------service-------------------------------------action
firewall modules firewall manage.
fw1 groups accept
and a reverse rule
hope this helps
when this works change teh accept to encrypt
"Roelandts, Guy"
<[email protected]> To:
"'Tony Wong'" <[email protected]>
Sent by: cc:
"'[email protected]'"
[email protected]
<[email protected]>
kpoint.com
Subject: RE: [FW1] encryption for FW-1 management
04/04/2001 11:22 AM
Tony,
Why not just adding the FW1_mgmt service to that other encrypting rule ? Or
create
a new rule, that is more restrictive, allowing only the real management
clients encrypted
access.
Met vriendelijke groeten - Bien à vous - Kind regards
Guy ROELANDTS
Compaq - Belgium
E-mail : [email protected]
Tel: +32(02)729.77.44 (options 3 - 3 - 1)
Fax: +32(02)729.77.65
-----Original Message-----
From: Tony Wong [mailto:[email protected]]
Sent: Tuesday, April 03, 2001 11:21 PM
To: [email protected]
Subject: [FW1] encryption for FW-1 management
What do I need to add to my rules in order to encrypt Fw-1 management
service from my local Lan to my remote Site?
We already have a VPN tunnel running between 2 boxes on different
networks. Http, telnet, ftp are all showing as encrypted between the
two firewalls and LANs but FW-1 Management is not.
Any help appreciated
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
|
|
