[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] RE: [FW1] Upgrading Nokia IP400
Hi, I upgraded 4 Nokias, 2 IP440 & 2 IP330, from IPSO 3.2.1 to IPSO 3.3 and CP Fw-1 4.1 to 4.1-SP2 ... no problems at all, worked as explained in the IPSO 3.3 release notes. Met vriendelijke groeten - Bien à vous - Kind regards Guy ROELANDTS Compaq - Belgium E-mail : [email protected] Tel: +32(02)729.77.44 (options 3 - 3 - 1) Fax: +32(02)729.77.65 -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Wednesday, April 04, 2001 12:06 AM To: FW-1 Mailing List Cc: '[email protected]' Subject: Re: [FW1] Upgrading Nokia IP400 I attempted a IPSO upgrade to 3.3 and the IP400 had boot errors and would not come up. We had to revert to 3.2. Two days working with Nokia did not solve the problem. If you have success with the upgrade please let me know. Frank Error message: tulip7 <Digital DC21143 Fast Ethernet> rev 48 int d irq 10 slot 3 port 4 netlog:eth-s3p4 .. ZNYX ZX346Q DC21143 pass 3.0 -- 00:c0:95:e0:c8:67 netlog:eth-s3p4 .. enabling 10baseT/UTP port in half duplex mode changing root device to wd0f wd0: interrupt timeout: wd0: status 50<seekdone> error 0 wd0: wdtimeout() DMA status 1<active> wd0: interrupt timeout: wd0: status 50<seekdone> error 1<no_dam> wd0: wdtimeout() DMA status 1<active> wd0: raw partition size != slice size wd0: start 0, end 4121711, size 4121712 wd0c: start 0, end 4122719, size 4122720 wd0: truncating raw partition wd0: rejecting partition in BSD label: it isn't entirely within the slice wd0: start 0, end 4121711, size 4121712 wd0f: start 3303216, end 4122719, size 819504 panic: cannot mount root syncing disks... done Rebooting... On Tue, 3 Apr 2001, FW-1 Mailing List wrote: > Date: Tue, 3 Apr 2001 10:41:21 -0500 > From: FW-1 Mailing List <[email protected]> > To: "'[email protected]'" > <[email protected]> > Subject: [FW1] Upgrading Nokia IP400 > > > I'm new to Checkpoint FW-1 so bear with me. We've got a Nokia IP400 here > that is running Checkpoint 4.1 SP0, IPSO Build 3.2.1. Now, I understand > that Checkpoint 4.1 sp3 doesn't work with IPSO 3.2.1, right? So to upgrade > it would we need to go to IPSO 3.3 first, or do we upgrade to Checkpoint 4.1 > sp3 first? Or do we have to upgrade to 4.1 sp2, then IPSO 3.3, then 4.1 > sp3? > ============================================================================ ==== To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ============================================================================ ==== ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|