[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [FW1] CVP Manager on Nokia
I have my Nokia sending ftp and http content to a Trend Virus wall box for virus scanning, this is working well. I now want to add redundancy by adding another Trend Virus Scanner and do load sharing betwen the two. The Nokia is running CKP 4.1 service pack 2 and will be the CVP Manager. I've installed the CVpm package from Nokia and created a cvpm.conf file on the Nokia. . I created new objects such as Server,resources and rules on the Management station and pushed out the policy but things stop working with the CVP manager setup. My cvpm.conf is included below. Do I need to do anything else. I have a document ( 4518) from Nokia which tells me I should be adding all my configs to fwopsec.conf. It's makes no sense to me. # CVPM Configuration file # The port for FW-1 -to- CVP-M communications cvpm auth_port 18181 ############## Chain configuration ############################################## drop_on_unsafe 1 # Recovery time in minutes recovery_time 1 # Number of servers on the chain num_of_servers 2 use_load_shares yes chained_server_1 cvp_on_scrubby2 chained_server_2 cvp_on_scrubby1 ############## Servers definitions ############################################## cvp_on_scrubby2 auth_port 18181 cvp_on_scrubb2 ip 149.137.3.132 cvp_on_scrubby1 auth_port 18181 cvp_on_scrubby1 ip 149.137.3.129 Fwopsec.conf has it's default settings. Thanks. -- John A. Gesualdi, CCNP, CCDP, MCP [email protected] The Providence Journal Company PhonePager================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|