[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [FW1] FW 4.0 - NAT (Cisco 827) - SecuRemote (key exch. OK/auth. not OK)
Ave,
we have a
Nokia IP 440 with FW-1 version 4.0 on the
central
side, and a W2K with SecuRemote on the client
side.
Network is accessed over an Alcatel ADSL modem.
Everything
works fine.
Due to a
change in requirements, we had to switch to
a Cisco 827
router, which performs NAT. Looks something
like
this:
LAN -- FW1
-- router -- network -- 827 -- laptop
The 827 gets
a dynamic IP address assigned from the
network
provider. It translates this address into
another
dynamic address which is given to the laptop.
When I set
up a new site, I get key exchange. But
when I
try to set passwords, I get a timeout saying
the firewall
is not accessible.
I have
changed the objects.C file on the firewall to
contain the
two 'NAT'-lines, but that doesn't seem
to
help.
What can be
wrong? There is no filtering on the
827, so
protocol 50 should in principle go through.
Greetings,
--
Jan Doumen netwerk/systeem beheer RVS verzekeringen Tel: 02 728 95 24 Henri Matisselaan 16 Fax: 02 728 91 88 B-1140 Brussel Url: www.rvs.be This message may not be
forwarded or cited without
prior permission from the author.
|